Glass and weather

Low-E glass

Also called: low-emissivity glass, Low-E coated glass

Quick answer: Low-E glass has a coating of metal, far thinner than a hair, on one face of the glass. It reflects heat while letting most daylight through. In a sliding door it keeps rooms cooler in summer and warmer in winter.

Made for Texas sun
Solar-control Low-E cuts the sun’s heat coming through a big glass door, so the room stays bright but cooler.

Less fading
It blocks much of the UV light that fades floors and furniture, though not all of it.

Added at the factory
The coating cannot be put on later. To get it, the glass unit is replaced with a Low-E one.
Inside a double-pane unit: where the coating sits

LightHeatOutsideInside1234

  1. Outer pane, the glass that faces the weather
  2. Low-E coating, on the pane’s inside face, sealed away from cleaning and wear
  3. Sealed gap, filled with dry air or argon gas
  4. Spacer and edge seal, which hold the panes apart and keep the gap dry
In hot climates the coating usually sits on the outer pane, so heat is turned back before it reaches the gap.

How to check if your glass has Low-E

People often do this check with a lighter flame. A small flashlight works the same way and keeps flame away from blinds and curtains.

  1. Dim the room
    Hold a small flashlight close to the glass, pointing straight at it.

    Safe to do yourself

  2. Count the reflections
    Double-pane glass shows four small images of the light, one from each glass face.

    Safe to do yourself

  3. Compare their color
    If one image has a different tint from the others, that face has a Low-E coating.

    Safe to do yourself

  4. Still not sure
    A technician can confirm it with a coating tester before you order new glass.

    Call a pro

Fix it yourself or call a pro

  • Safe yourselfRun the flashlight check and clean the glass as usual. The coating is sealed inside the unit, so normal glass cleaner is fine.
  • Take careAdding window film to double-pane glass: check with the film maker first, since some films add heat stress to the glass.
  • Call a proMeasuring for and fitting a new Low-E glass unit. The panel has to come out: never lift it alone.

More on this: can you replace just the glass in a sliding door?

Sunlight coming through a wide set of sliding glass doors into a bright living room
Big glass doors let in the most sun heat, which is where Low-E pays off.

Low-E types and plain glass

Solar-control Low-E
Blocks most of the sun’s heat, the best fit for Texas
Lets in less free warmth from winter sun
High-gain Low-E
Keeps heat in and lets winter sun warm the room
Lets more summer heat in, a poor fit for hot climates
Clear double-pane
Usually the lower-cost glass
More heat and UV come through

Room too hot by the glass door?

Select Sliding Doors fits energy-efficient Low-E glass and new doors through sliding door installation across Dallas-Fort Worth. Mon to Sat, 7am to 10pm.

Questions people ask

Does Low-E glass look tinted?

Most modern Low-E glass looks nearly clear. Some types have a faint gray, green or blue cast, easiest to see from outside or at an angle.

Can I replace just the glass with Low-E?

Usually, yes. If the frame and rollers are in good shape, the old glass unit can be swapped for a Low-E unit made to size. See replacing just the glass in a sliding door.

Does Low-E glass stop all UV light?

No. It cuts a large share of it, so fading slows down, but rugs and furniture in strong sun can still fade over time.

Related terms

Photo: own media library. Diagram: Select Sliding Doors.

Get in touch with us

Slide on in!

Contact us and schedule your FREE in-house estimation!