Locks and security

Anti-lift devices

Also called: anti-lift blocks, anti-lift screws

Quick answer: anti-lift devices are small blocks or screws fitted in the top track above a sliding panel. They fill the space above the panel, so a closed door cannot be lifted off its rollers and out of the frame from outside. The door still slides as normal.

Why a locked door can lift
Panels are fitted by lifting them into the frame. On some doors, that same lift frees the hook from the keeper.

Out before service
The panel cannot come out for roller or track work until the devices are backed out. Put them back afterwards.

A pin lock helps too
A pin through both panel frames where they overlap stops lifting as well as sliding.
Where they go, and the gap they close

12345

  1. Top track, the head of the door frame
  2. Sliding panel, riding on rollers below
  3. Lift gap, the space that lets the panel be raised
  4. Anti-lift screw or block, set just clear of the panel
  5. Fixed panel, held in place and not meant to move
Left: no device. Right: a screw fills the gap, so the panel still slides but cannot rise.

How to check and fit them

Work in this order, and keep a helper close in case the panel shifts.

  1. Look in the top track
    Open the door and check above the sliding panel’s path for screws or blocks.

    Safe to do yourself

  2. Test the closed door
    Lock it and push up gently on the panel from inside. It should barely move.

    Take care: push gently, never force it

  3. Fit screws or blocks
    Drive short screws into the top track above the panel’s path, heads just clear of it, then slide the door through.

    Take care: drill frame metal only

  4. Still lifts, or it rubs
    The rollers may be set too low or worn: have them adjusted or replaced.

    Call a pro

Fix it yourself or call a pro

  • Safe yourselfCheck the top track for devices, and make sure they go back in after any roller or track work.
  • Take careDrilling the top track for screws. Use short screws, drill frame metal only, and keep a helper close.
  • Call a proA panel that already jumps its track, worn rollers, or any job that means taking the panel out. Glass panels are heavy: two people at least.

More on this: which patio doors are most secure.

The top edge of a sliding glass panel running in its top track
The top track of a sliding panel. Anti-lift devices sit in this space.

Three ways to stop the lift

Anti-lift screws
Simple, and you can set the clearance
Must be backed out before the panel can come out
Anti-lift blocks
Made to fit the track, often easy to remove
Have to match your track’s shape
Pin lock
Stops lifting and sliding at once
Means drilling both frames, and locks in set positions only

Door lifts or rattles when locked?

Select Sliding Doors handles sliding door repair, including locks and anti-lift fixes, across Dallas-Fort Worth. Mon to Sat, 7am to 10pm.

Questions people ask

Will anti-lift devices stop my door sliding?

No, if they are set right. They leave a slim gap above the panel, so it slides as before but cannot rise far enough to come off.

Does a bar in the track do the same job?

No. A bar in the bottom track stops the door sliding open. Anti-lift devices stop it being lifted. Using both covers both ways in.

Does my door already have them?

Some doors come with anti-lift blocks or clips fitted. Open the door and look in the top track above the sliding panel. If nothing is there, it has none.

Related terms

Photo: own media library. Diagram: Select Sliding Doors.

Get in touch with us

Slide on in!

Contact us and schedule your FREE in-house estimation!