Moving parts

Bi-fold door track

Also called: folding door track

Quick answer: a bi-fold door track is the rail at the top of a folding door, often with a second rail or guide at the floor. It keeps the hinged panels in line as they fold and stack to one side. It is used on closet doors and on folding glass patio doors.

Where the weight goes
Either the top track or the floor track carries the panels. The other one only guides them.

Level and straight
Heavy glass folding panels bind when the header sags or the floor track sinks or bends.

Keep it clear
A floor track collects grit like any sliding door track. Vacuum it, and never oil it.
How the panels fold along the track

1234

  1. Pivot, a fixed pin at the jamb that the first panel turns on
  2. Carrier, the roller or guide that runs in the track at the folds on the track line
  3. Outer fold, a hinge that swings away from the track as the door folds
  4. Closed position, all panels in one straight line along the track
Seen from above, half folded toward the stack at the jamb.

When it sticks: what to check

Start with the easy causes. Work in this order.

  1. Clean the tracks
    Vacuum the top and floor tracks. Grit stops a carrier from rolling.

    Safe to do yourself

  2. Check the carrier
    Make sure it sits in the track and turns freely. Re-seat it if it popped out.

    Safe to do yourself

  3. Adjust the pivot
    Move the pivot bracket until the panels hang level and the gaps are even.

    Take care: heavy panels

  4. Bent track or sagging panels
    A twisted track, a broken carrier or a sagging header needs repair.

    Call a pro

Fix it yourself or call a pro

  • Safe yourselfCleaning the tracks, re-seating a closet door guide that popped out, and tightening loose track screws.
  • Take careLifting panels off their pivots. Closet panels are light, but glass folding panels are heavy: two people at least.
  • Call a proA bent or cracked track, worn carriers on a glass folding door, or a header that sags.

More on this: sliding door track repair for bent or damaged tracks.

Bi-fold glass patio door partly open, its hinged panels folded and stacked along the top track
AI image

Top-hung, bottom-rolling or closet hardware

Top-hung
Only a low guide at the floor, easier to step over
The header above must be strong enough to carry the full weight
Bottom-rolling
The floor takes the weight, so the header carries less
The floor track fills with dirt and needs regular cleaning
Closet bi-fold
Light and simple, with parts that are easy to find
Plastic guides wear and pop out of the track

Folding door sticking or off its track?

Select Sliding Doors handles sliding door repair, including bi-fold door tracks, across Dallas-Fort Worth. Mon to Sat, 7am to 10pm.

Questions people ask

Why does my bi-fold door keep coming off the track?

The top guide has usually worn or slipped out, or the pivot has moved. Re-seat the guide, then adjust the pivot so the panels hang level.

What can I put on a bi-fold door track?

Clean it first, then use a light dry silicone spray. Oil and grease hold dust and make the door stiffer.

Can a bi-fold track be repaired, or does it need replacing?

Loose screws, a worn guide or a small bend can often be fixed. A twisted or cracked track is replaced, matched to the door’s hardware.

Related terms

Photo: AI image. Diagram: Select Sliding Doors.

Get in touch with us

Slide on in!

Contact us and schedule your FREE in-house estimation!