Interlock
Also called: interlock rail, meeting rail
Quick answer: the interlock is where the two panels of a sliding patio door meet in the middle when the door is closed. The edge of each panel has a hooked rail, and the two rails lock into each other. A seal along them keeps out air and water.
- Sliding panel, it runs in its own track and moves in the arrow’s direction to open
- Fixed panel, it stays put in the track beside it
- Interlock rails, a hooked leg on each panel edge, passing each other when closed
- Seals, along the rails, pressed against the other panel to close the joint
Draft in the middle of the door? How to check
Work from the simplest cause to the hardest. Each step rules something out.
-
Close and lock the doorOn some doors the lock pulls the sliding panel tight into its seals, so test the joint locked.
Safe to do yourself
-
Look at the interlock sealsCheck for flattened, torn or missing strips along both panel edges.
Safe to do yourself
-
Check the panel is squareOpen it slightly. The gap to the side frame should be even from top to bottom.
Take care: small turns
-
Replace seals or realignNew interlock seals for your door, or a full realignment of the sliding panel.
Call a pro
Fix it yourself or call a pro
- Safe yourselfVacuum dust from the interlock seals, then close and lock the door and look along the joint for gaps.
- Take careTurning the roller screws to square the sliding panel. Turn a little at a time, and check the latch still catches afterwards.
- Call a proNew interlock seals often mean lifting a panel out. Glass panels are heavy and tempered glass can shatter: two people at least, or call a pro.
Step by step: how to realign a patio door.

Draft down the middle of the door?
Select Sliding Doors handles sliding door repair, including seals and panel alignment, across Dallas-Fort Worth. Mon to Sat, 7am to 10pm.
Questions people ask
What is the interlock on a sliding glass door?
It is the pair of hooked rails on the panel edges that meet in the middle of the door. When the door closes, they overlap and seal the joint between the panels.
Why is there a draft where my sliding door panels meet?
Usually the interlock seals are worn or missing, or the sliding panel has dropped out of square. Lock the door first, then check the seals and the gap to the frame.
Can I replace the interlock weatherstrip myself?
On some doors the seals screw to the panel edges, and the door maker sells a matching set. Getting at them can mean lifting a panel out, which takes two people at least.
Related terms
Photo: AI image. Diagram: Select Sliding Doors.