# Mortise Lock

- Link: https://selectslidingdoors.com/glossary/mortise-lock/
- Published: 2024-08-22T14:29:38+00:00
- Author: Rowdy

[Home](https://selectslidingdoors.com/)/[Glossary](https://selectslidingdoors.com/glossary/)/
Mortise lock

Locks and security

# Mortise lock

Also called: mortise hook lock, lock body

**Quick answer:** a mortise lock is a lock body that sits inside a pocket (the mortise)
cut into the edge of a door panel. On a sliding patio door, it holds the hook that
grabs the keeper on the frame. The handle on the face of the panel works it through
a small tailpiece.

Most patio doors use one

The standard sliding patio door lock is a mortise hook lock, worked by the thumb
turn on the handle.

Mortise or surface-mounted

A surface lock screws onto the face of the panel and shows. A mortise lock is set
into the panel, so only a slim plate shows.

Replacing one

Match the faceplate length and shape, the screw hole spacing and the hook position.
Take the old lock with you.

How it fits in the panel

 1. **Handle set**, screwed through the face of the panel
 2. **Pocket**, the mortise cut into the panel edge
 3. **Lock body**, which slides into the pocket
 4. **Faceplate**, screwed to the panel edge, with the hook slot
 5. **Hub**, where the thumb turn’s tailpiece fits

The lock body slides in from the panel edge, and the handle reaches it through the
panel.

## Replacing a mortise lock, in order

On most sliding doors the lock comes out without taking the panel out of the frame.
Go in this order.

 1.  Measure before you buy
 2.  Note the door brand, then measure the faceplate, its screw spacing and where the
     hook sits.
 3.  Safe to do yourself
 4.  Take off the handle
 5.  Remove the screws that hold the inside and outside handles together.
 6.  Safe to do yourself
 7.  Slide the lock out
 8.  Open the door, remove the faceplate screws on the panel edge and pull the lock
     body out.
 9.  Take care: keep the panel in its track
 10. Fit and test
 11. Slide in the new lock, refit the handle, then adjust the keeper until the hook
     catches.
 12. Take care: test it with the door open first

## Fix it yourself or call a pro

 * **Safe yourself**Tighten loose handle screws, blow dust out of the hook slot 
   and use a dry lubricant, not oil.
 * **Take care**Swapping the lock body like for like. Keep the panel in its track,
   and never file or drill the panel edge to make a lock fit.
 * **Call a pro**No matching lock, a pocket that has to be cut bigger, a multipoint
   lock, or damage after a break-in attempt.

More on this: [why a sliding door won’t lock or latch](https://selectslidingdoors.com/sliding-door-wont-lock/).

![A mortise lock body with its long faceplate and a key](https://selectslidingdoors.
com/wp-content/uploads/2024/08/a-door-lock-assembly-and-key-2023-11-27-05-02-51-
utc-768x512.jpg)

A mortise lock body and faceplate. A sliding door version has a hook in place of
the latch bolt.

## Mortise and the other locks you will hear about

Mortise hook lock

Hidden in the panel, neat and solid

Must match the pocket and hole spacing exactly

Surface-mounted lock

Easy to fit and to replace

Shows on the face of the panel, and is often lighter duty

Multipoint lock

Hooks at several points along the panel edge

Brand-specific, usually the costlier part, and needs careful setup

## Lock worn, loose or broken?

Select Sliding Doors handles [sliding door repair](https://selectslidingdoors.com/sliding-door-repair/),
including mortise lock replacement, across Dallas-Fort Worth. Mon to Sat, 7am to
10pm.

[Call 469-915-5230](https://selectslidingdoors.com/glossary/mortise-lock/4699155230)
[Sliding door repair](https://selectslidingdoors.com/sliding-door-repair/)

## Questions people ask

How do I know if my patio door has a mortise lock?

Open the door and look at the edge of the panel by the handle. A narrow metal plate
set flush in the edge, with a slot for the hook, means a mortise lock.

Will any mortise lock fit my door?

No. Body size, faceplate shape, screw spacing and hook position vary by brand and
door age. Some replacements are made to fit several doors, but check every measurement
first.

Do I need a new handle too?

Not always. The old handle can stay if its tailpiece fits the new lock’s hub. Handles
and locks are often sold as a matched set.

## Related terms

[Sliding door latch](https://selectslidingdoors.com/glossary/sliding-door-latch/)
[High-security locks](https://selectslidingdoors.com/glossary/high-security-locks/)
[Anti-lift devices](https://selectslidingdoors.com/glossary/anti-lift-devices/)[Sliding door repair kit](https://selectslidingdoors.com/glossary/sliding-door-repair-kit/)

Photo: own media library. Diagram: Select Sliding Doors.
